Track My Order
My Account
Wishlist
Call now
How to fit Stick Fit Slim blinds | 247 Guides
Stick Fit Slim and Stick Fit Lite blinds allow you to fit without the need for drills, or screws. Read our guide below to see how you can refresh your windows in minutes!
Looking for the measuring guide? View our Stick Fit/Stick Fit Slim/Stick Fit Lite measuring guide here!
PREPARE THE WINDOW
Thoroughly clean the glass where the rails will be fitted — both at the top and bottom of the visible glass area.
Ensure the surface is completely dry before installation, as the adhesive willnot bond correctly to dusty or damp glass.
STEP 1 - FITTING THE TOP RAIL
Peel the adhesive backing from the top rail (with the light-blocking lip) and position it at the top edge of the visible glass.
The rail should sit flush with the edge of the rubber seal (if visible), or flush with the edge of the frame if the seal is not visible.
Fitting a Stick Fit Slim blind? Allow at least 10 minutes for the adhesive to bond before moving on to the next step.
STEP 2 - FITTING THE BOTTOM RAIL
Gently pull the bottom rail downwards to stretch the cords and peel the adhesive backing from the bottom rail. Carefully align it with the bottom edge of the visible glass and press firmly along the full length to secure in place.
The blind is now fully installed.
STEP 3 - OPERATING THE BLIND
To raise and lower the blinds, simply pull lightly up and down using the handle.
OPTIONAL - ADJUSTING THE CORD TENSION
If the blind does not stay in position when fully raised and begins to slip down, the cord tension may need adjusting.
To adjust:
• Carefully pull the spring out from underneath the bottom rail. Do not use scissors for this step.
• One cord end is secured by a holding screw. Loosen the screw slightly while holding the cords.
• Pull approximately 10mm of cord through (away from the spring) to increase tension.
• Tighten the screw securely.
• Test the blind and repeat small adjustments if required.
Once correct, tuck the spring and cords neatly back behind the rail.
CHILD SAFETY
WARNING
Stick Fit Slim and Stick Fit Lite Blinds are cordless to operate and child safe by design.
However:
• Ensure beds, cots and furniture are positioned away from windows.
• If the blind is pulled away from the glass, check for damage before refitting.
If removed, simply reinstall following the steps above.
