Balmy Palms (Blackout), Lush Green - Twist&Fit Roller Blind

Don't miss out - 25 % off Ends Soon

Balmy Palms (Blackout), Lush Green - Twist&Fit Roller Blind - Image 4

Balmy Palms (Blackout), Lush Green - Twist&Fit Roller Blind - Image 5

Balmy Palms (Blackout), Lush Green - Twist&Fit Roller Blind - Image 6

Balmy Palms (Blackout), Lush Green - Twist&Fit Roller Blind - Image 7

Balmy Palms (Blackout), Lush Green - Twist&Fit Roller Blind - Image 8

Balmy Palms (Blackout), Lush Green - Twist&Fit Roller Blind - Image 9

Balmy Palms (Blackout), Lush Green - Twist&Fit Roller Blind - Image 10

Video

From: £18.74

Enter window width and height in the boxes below for an exact made to measure price

inches

Width (cm)

Min: 410mm Max: 2100mm

Drop (cm)

Min: 410mm Max: 1800mm

Please Note: Twist&Fit has been specifically designed to fit within the window recess.

Pay in 4 interest-free payments with

Delivered in 10 - 12 working days

How to measure your blinds

Click to view our Twist&Fit Roller measuring guide below, or view our page guide here!

How to fit your blind

Click to view our Twist&Fit Roller fitting guide below, or view our page guide here!

Frequently asked questions about this product

Will this blind blackout my room?

While blackout roller blinds effectively dim the light in a room, it's important to note that during peak daylight hours, some light may still seep through due to small gaps at the sides of the blind. However, this light bleed is minimal, and the fabric of our blinds ensures that 100% of direct light is blocked out.

Our customers have found that pairing these blinds with a pair of curtains, from 247Curtains, hung in front of the window recess can further minimise any remaining light bleed. This combination not only enhances the blackout effect but also contributes to creating the ideal environment for a restful night's sleep.

How do I clean my roller blind?

Keeping roller blinds clean is pretty simple! Regular usage of the blind will deduce the likelihood of dust build-up throughout the year. For a more vigorous clean, use a vacuum with a soft attachment to remove any dust.

An extra step would be to then use a damp, clean cloth to gently wipe over the blind where required. Please be mindful of textured and blackout fabrics when doing this step — being careful and lightly wiping is key to keeping your blind looking its best!

How is the bottom of the blind finished off?

We no longer offer different types of finishes for the bottom of the blind, so as standard every blind will have a straight finish with a hidden bottom bar to keep the blind weighted.

I’m unsure on the roller blind colour or texture?

If you’re spoilt for choice, our free sampling service is here to help. Select and order as many samples as you’d like, and we’ll send them to you by first class post free-of-charge!

Will this blind type be suitable for my room?

Blackout Twist&Fit roller blinds are a great choice for any room in your home. The speed and ease of fitting, coupled with the light-blocking fabric is useful in bedrooms and living rooms, where you may want that added level of privacy. The smooth operating sidewinder chain and the fresh, modern finish will provide a much-loved blind year-on-year!

What are Twist&Fit Roller Blinds?

The standout feature of Twist&Fit roller blinds is their no-drill, easy installation process. They can be fitted in under 30 seconds without the need for tools, drills, or screws, ensuring your walls remain untouched. We provide the same great fabrics, quality and durability as our well-loved roller blind ranges.

Will my window be suitable for Twist&Fit?

Twist&Fit roller blinds are suitable for windows with a recess depth of at least 52mm. As Twist&Fit blinds are designed to fit snug within the recess, they are not available for exact fitting. It is not possible to fit more than one Twist&Fit blind within a singular recess.

Do I need screws for Twist&Fit rollers?

The great thing about Twist&Fit roller blinds is the ease of fitting and special tension system which provides an easy, screw-free installation. Available for recessed windows only, your new blind can be fitting in 30 seconds or less — it’s that easy!

Specification & Child Safety

• Free UK mainland standard delivery on orders over £169.

• Full fitting instructions.

• 5 year guarantee.

• Cord cleat/tidy included with all our blinds.

The 247 Blackout range comes with a white backing.
Roller blinds are supplied as standard with a sidewinder control unit. The operation is through a white plastic beaded chain used to raise and lower.
All blinds are mounted on a strong aluminium tube – 32mm in diameter. We introduce a 40mm tube for larger blinds where necessary.
All brackets are painted white over metal – 45mm width x 65mm length.
The bottom finish of the blind will be a straight finish. This will be finished with either a ‘stitched bottom pocket’ or a heat welded seam, with a plastic bottom lathe, dependent on the suitability of the fabric.
Please note that the cloth width is 3.5 - 4cm narrower than the overall cassette width to allow for the control component. We always manufacture based on full blind width, not fabric width.
All items are cut to size and will be accurate with working tolerances and variances of +/-5mm.
All our blinds are manufactured and supplied to be compliant with child safety regulations. As part of this compliance, all control cords and chains will be made to a maximum of 1 metre. If you need to discuss this, please contact us.
All roller blinds are produced with extra fabric added to the drop ordered. This is to ensure that there is enough material to conceal the metal tube when the blind is full down/closed. This is normal and standard practice throughout the industry.

On Standard Roller Finishes, Fixtures & Fittings

All blinds are mounted on a strong aluminium tube – 32mm in diameter. We introduce a 40mm tube for larger blinds where necessary.
Choose your chain type, from durable plastic to stylish chrome. The ball will be 4.5mm.
All brackets are painted white over metal – 45mm width x 65mm length.
The ball chains are 4.5mm in size.
The bottom finish of the blind will be a straight finish. This will be finished with either a ‘stitched bottom pocket’ or a heat welded seam, with a plastic bottom lathe, dependent on the suitability of the fabric choice.
All items are cut to size and will be accurate with working tolerances and variances of +/- 5mm.
Roller blinds with a width greater than 180cm and a drop greater than 164cm MAY have a horizontal seam due to fabric width / design.
Cloth width is 3.5— 4cm narrower than the overall bracket to bracket (exact) width to allow for the control components.
The chain drops come as an endless loop with a safety P clip. The sizes for these are as follows:-

Twist&Fit Roller Blinds

These blinds are designed as a drill-free, screw-free solution for fitting roller blinds. Brackets are not required, and you can fit these blinds in a matter of seconds.
Available under the “recess” fitting option only under the relevant products.
Twist Fit Roller blinds are supplied as standard with a sidewinder control unit. The operation is through a 4.5mm chrome beaded chain used to raise and lower.
These roller blinds are produced the same way as a standard roller, though unlike roller blinds the tolerance of -5mm is not made for the recess due to the adjustability of the fitting.
The twist cog can be used to adjust the tension.

On Twist&Fit Roller Finishes, Fixtures & Fittings

Twist&Fit Unit is made from POM & PEM materials. This provides a durable, moisture-resistant component.
The Twist End at its largest point (the cog wheel) has a width of 5.1cm | The external pad is 4.1cm width & height. | The distance from the end of the piece to the roller tube is 3.5cm, and when compressed at is smallest is 1.9mm to the tube.
Sidewinder End is provided with a chain cover. Please do not attempt to remove this cover.
The sidewinder end at its largest point is 5.1cm width & 6.4cm height.
Only available on a 32mm diameter tube.
All items are cut to size and will be accurate with working tolerances and variances of +/- 5mm.
The bottom finish of the blind will be a straight finish. This will be finished with either a ‘stitched bottom pocket’ or a heat welded seam, with a plastic bottom lathe, dependent on the suitability of the fabric choice.
Cloth width is 4-4.5cm narrower than the overall bracket to bracket (exact) width to allow for the control components.

WARNING

Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product.

To avoid strangulation and entanglement, keep cords out of the reach of young children.

Cords may become wrapped around a child’s neck. Move beds, cots, and furniture away from window covering cords.

Do not tie cords together. Make sure cords do not twist and create a loop.

Fits in Under 30 Seconds